iCON35

  • MODbus RTU (RS485)
  • Interconnection up to 128 units
  • 50mm - 750mm stroke length
  • Speed : 3 to 33 mm/s

Description:

Our bestseller for minor lifting task available as iCON35, the intelligent in-line actuator solution with integrated controller. The perfect match without compromising on design or efficiency.

Standard specifications

Temperature : Operation: - 20 ̊C to + 70 ̊C Storage: - 40 ̊C to + 70 ̊C
Cable specification : Cores: 2 x AWG16 + 6 x AWG 28, Ø = 6,4 mm, black jacket, Molex Mini-Fit Jr. 8 pin or similar.
Bending Radius : 6 x cable diameter

Actual weight may vary depending on model and options selected
For other mechanical data please refer to Concens standard CON35/50/60 datasheet.

iCONxx configuration


Electrical Wiring

Max. Current load : iCON35: 2 Adc @ 24 Vdc, 4 Adc @ 12 Vdc
Idle current : Approx 10 mAdc
Current trip delay : 20 ms
PWM frequency : 25 kHz
Digital inputs : ‘High’: Uin = 4 Vdc - Vsupply; ‘Low’: Uin = 0 Vdc - 1 Vdc
Supply voltage : 12 Vdc (min 10 Vdc at 1 meter cable, max 28 Vdc) or
  24 Vdc (min 20 Vdc at 1 meter cable, max 14 Vdc) (max ripple < 10 % @ full load)
Serial data line : RS485 asynchronous, point to point or multi-point, 2 wire half-duplex
Communications : Modbus RTU
Bauds rate : 115000 bps
Com setup : 8 Bit, Parity -None, Stop bit -1

For more information on Modbus RTU please go to www.modbus.org 
MODBUS over serial line specification and implementation guide V1.0

iCONxx wiring
Scroll to Top