iCON35

Our bestseller for minor lifting task available as iCON35, the intelligent in-line actuator solution with integrated controller. The perfect match without compromising on design or efficiency.

Standard specifications

Temperature :Operation: – 20 ̊C to + 70 ̊C Storage: – 40 ̊C to + 70 ̊C
Cable specification :Cores: 2 x AWG16 + 6 x AWG 28, Ø = 6,4 mm, black jacket, Molex Mini-Fit Jr. 8 pin or similar.
Bending Radius :6 x cable diameter

Actual weight may vary depending on model and options selected
For other mechanical data please refer to Concens standard CON35/50/60 datasheet.

iCONxx configuration


Electrical Wiring

Max. Current load :iCON35: 2 Adc @ 24 Vdc, 4 Adc @ 12 Vdc
Idle current :Approx 10 mAdc
Current trip delay :20 ms
PWM frequency :25 kHz
Digital inputs :‘High’: Uin = 4 Vdc – Vsupply; ‘Low’: Uin = 0 Vdc – 1 Vdc
Supply voltage :12 Vdc (min 10 Vdc at 1 meter cable, max 28 Vdc) or
24 Vdc (min 20 Vdc at 1 meter cable, max 14 Vdc) (max ripple < 10 % @ full load)
Serial data line :RS485 asynchronous, point to point or multi-point, 2 wire half-duplex
Communications :Modbus RTU
Bauds rate :115000 bps
Com setup :8 Bit, Parity -None, Stop bit -1

For more information on Modbus RTU please go to www.modbus.org 
MODBUS over serial line specification and implementation guide V1.0

iCONxx wiring

Properties

  • Industrial interface MODBUS RTU on RS485
  • Interconnection up to 128 units
  • Slim design and Convincing look
  • Internal overcurrent protection
  • Internal stroke limitation
  • Plug & Play solution with conXion box

Alternatives

CON35

  • Slimfit Desing (35mm diameter)
  • Max. push/pull 2200N.
  • Max. speed 33mm/sec
  • Standard IP66 (optional IP69k)
Delivery time: workdays
© A&E Trading b.v. 2022
Made by Convident