iCON50 is based on our middleweight champion CON50 with integrated controller, without compromising the sleek, clean lines for optimal integration.
Standard specifications
| Temperature : | Operation: – 20 ̊C to + 70 ̊C Storage: – 40 ̊C to + 70 ̊C |
| Cable specification : | Cores: 2 x AWG16 + 6 x AWG 28, Ø = 6,4 mm, black jacket, Molex Mini-Fit Jr. 8 pin or similar. |
| Bending Radius : | 6 x cable diameter |
Actual weight may vary depending on model and options selected
For other mechanical data please refer to Concens standard con35/50/60 datasheet.
Electrical Wiring
| Max. Current load : | iCON50: 8 Adc @ 24 Vdc, 16 Adc @ 12 Vdc |
| Idle current : | Approx 10 mAdc |
| Current trip delay : | 20 ms |
| PWM frequency : | 25 kHz |
| Digital inputs : | ‘High’: Uin = 4 Vdc – Vsupply; ‘Low’: Uin = 0 Vdc – 1 Vdc |
| Supply voltage : | 12 Vdc (min 10 Vdc at 1 meter cable, max 28 Vdc) or |
| 24 Vdc (min 20 Vdc at 1 meter cable, max 14 Vdc) (max ripple < 10 % @ full load) | |
| Serial data line : | RS485 asynchronous, point to point or multi-point, 2 wire half-duplex |
| Communications : | Modbus RTU |
| Bauds rate : | 115000 bps |
| Com setup : | 8 Bit, Parity -None, Stop bit -1 |
For more information on Modbus RTU please go to www.modbus.org
MODBUS over serial line specification and implementation guide V1.0
Properties
- Industrial interface MODBUS RTU on RS485
- Interconnection up to 128 units
- Slim design and Convincing look
- Internal overcurrent protection
- Internal stroke limitation
- Plug & Play solution with conXion box
Slimfit Desing (50mm diameter)
